Kia Cadenza Forum banner

Roof sharkfin loose

3412 Views 1 Reply 2 Participants Last post by  foldman
I just noticed today that the shark fin on the roof is lifting up on one side. Sucks because I was at the dealership yesterday too, could have at least had them look at it and tell me what they think needs to be done.

I know it's a warrantee item, I'm just curious if anyone has pulled it off to see how it is mounted. Doesn't look like 2 sided tape or adhesive, but I can't tell from the side that is loose.
1 - 2 of 2 Posts
Manual says...

Remove the rear roof trim.
(Refer to Body - "Roof Trim")
2. Disconnect the connector (A) and cable (B) from the roof antenna.
3. Remove the roof antenna after removing a nut (A).
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top