Kia Cadenza Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Does anyone know how to remove the front bumper on a 2014 Cadenza in order to remove the headlight assemblies to access the clips that retain the HID lamps? Is there a way to remove the headlight assemblies without taking the bumper off? Also is it necessary to re-aim the lights after replacing the low beams?
 

·
Registered
Joined
·
754 Posts
We have a thread or two about that, but essentially, it's just a few bolts/screws and fasteners. under the hood, 2 bolts remove intake inlet, then remove all of the pop/screw fasteners across the top. Inside the wheel well, you'll see, it's either one or 2, screws on each side of the car. Then under the car several fasteners same as the ones on top. The area under the fenders is held in with tab like attachment, so a few bumps under fender, and tab holes on the cover, you just gotta pull the corners out right at the wheel wells on both sides.. Throw a towel on the ground so you don't scratch the bumper, but once you've removed all screw/bolts/fasteners, and popped the two side pieces, really the only thing left are the fog wires, the cover will lift off and drop gently to the ground.
 
1 - 2 of 2 Posts
Top